DY-F105 Waterproofing agent
Classification:
Silicone intensive processing products
Summary:
IntroductionDY-F105isakindofMethylsilicatewaterproofingagent,whichcanbedilutedwithwaterbeforeusepollution-free.SpecificationAppearance:colorlessorlightyellowtransparantliquid,Solidcontent:20%±2%PH:12-
Key words:
DY-F105 Waterproofing agent
Description
Introduction
DY-F105 is a kind of Methyl silicate waterproofing agent, which can be diluted with water before use pollution-free.
Specification
Appearance: colorless or light yellow transparant liquid ,
Solid content: 20%±2%
PH : 12-14
Viscosity(25°C): 5-30 mm2/s
Water absorption ratio: ≤ 15%.
Basic Use
● Use for brick, increasing it’s hydrophobicity.
● Use for concrete sidewalks and driveways, improving the ability of anti-frost, increasing the use life, which can be mixed with cement.
● Use for natural and artificial stone, such as limestone, sandstone, cast stone and ceramic, can reducing weathering, improving weather resistance.
● Use for the sand layer of the proof, can improve the resistance of the soiling and increase the bonding strength of the asphalt and the sand layer.
● Use for the minerals with high water absorbent, such as perlite, can reduce the water absorption, to maintain a higher strength in wet strength.
● As the addition of clay or ceramic, reducing the water demand, improving the wet -strength.
● Additive for water glass paint,paste,pipe insulation and wall,can enhance the hydrophbic properties.
● For latex paint and tile can improve the strength and water resistant adhesive force.
● waterproof agent is also used as a wood board,fiberboard,paper and processing products, but must use a specific neutralizing agent before use.
Usage and Dosage
General water diluted to the concentration of 3% when using.
Attention
The products can play a role in 24 hours, in the scope we should avoid water contact.
Previous Page
Next Page
Previous Page
Next Page
Related Products
Silicone oil has several excellence character , e.g viscothermo properties, low surface tension, interfacial properties, whether resistance
Silicone oil has several excellence character , e.g viscothermo properties, low surface tension, interfacial properties, whether resistance
Spray release agent, easy use, better effect. Content solid: ≥10% Solvent: butagas Volume(ml): ≥450
20%-30%contentorganicsiliconehighmoleculeemulsion,anionic,environmentalprotection,temperatureresistance,antiseize Appearance:Milk-whiteliquidSolidcontent:20-30%PHvalue:6.5-8 Zhaoyuancompanyuseitformol
Message
Leave your contact information to get product discount information.
