CONTACT US
Contact: Ms.Jane
E-mail:Jane@dayi.com.cn
Mobile:(86)153 0638 6035
Tel:0086-535-7360696
Fax:0086-535-7387127
wechat: (86)153 1516 8119
QQ : 1517168880
skype: chggzz
Ms.Alice
gxp@dayi.com.cn
(86)153 0638 6031
0086-535-7388728
0086-535-7388727
15306386031
1824617597
alice.gong77
Copyright © 2018 Shandong Dayi Chemical Co., Ltd. All Rights Reserved
CATEGORY
DY-ABC High Grade Waterproofing Agent
Introduction
This products is a kind of three components of the organ-silicone waterproofing agent,where in A, B component is a water emulsion activity siloxane polymers,Team C is the catalyst, this product with water environmental protection,safe non-toxic,the waterproofing coating resistance to high and low temperature ,aging resistance, good waterproof effect,wide adaptability,non stick, anti-sticking properties.it is a good comprehensive effect of advance waterproofing agent.
Specification
Index |
DY-ABC-A |
DY-ABC-B |
DY-ABC-C |
Appearance |
milky white liquid |
milky white liquid |
crystalline solid |
solid content |
30±2% |
30±2% |
≥99% |
PH Value |
6-8 |
4-6 |
|
centrifugal stability |
no hierarchical |
Application
1.Used in the textile industry,umbrella cloth,canvas,ski clothes etc waterproofing.
2.Used in construction and building materials industries,such as cement mortar exterior wall,rock wall,gypsum board,calcium silicate board,cement bridge,stone,cement road surface waterproof treatment.
Usage and Dosage
According to the proportion of A:B:C=80:20:5 ratio weighing. and then the complex was diluted to a solid content of 1-3% water solution with clean water.The component C prior to 80°c stirring to dissolve completely diluted with water 20 times,then according to the proportion adding into the diluted water,finally according to the proportion of added A.B.group into diluted water,stirring evenly,when used with a diluted liquid for dipping,spraying,brushing,after drying then will be waterproofing.
Note
The B component during storage of layered tendency, shall shake well before use. Does not affect, The dilute solution should be used within 24hours.